As one of the most used items in the home, your garage doors will run into a few problems every once in a while. Here the steps you must take when you face a garage door that has gone off its tracks.
What to Do When Garage Doors Come Off Their Tracks
Garage doors that have gone off their tracks can be a very frustrating thing, but it can also pose a risk to not only your property but your family and pets as well. Therefore, it is important to take the time to repair a garage door that has gone off its tracking system. The following includes information regarding the steps you need to take to get your garage door back in working order.
The Tools Needed to Fix Off-Track Garage Doors
First things first, you will need a couple of tools before getting to work on your garage door tracking system. You will need the following: a set of pliers, locking pliers, and a rubber mallet. All these can be easily found within any home improvement store.
Safely Open the Door
The first step towards fixing your garage door is to pull the garage door up. This is done to determine where the problem area is within the tracking system. Note that you should first set it on manual mode and have someone there to help you. Garage doors are heavy and can come crashing down rapidly, causing bodily harm. If you are not aware of just how to do this safely, it is highly recommended to seek the services of a Bakersfield garage door repair company.
Finding the Trouble Spot & Fixing It
Once you have located the troubled area, you should then use your pliers to lock the track in place. Now that the track is stopped, you then utilize your lock pliers to pull on the outer edge of the track, which will allow you to place wheels back in the correct position. Once this is done, then you can begin to use your rubber mallet to knock the door back onto the track as well.
Testing the Garage Doors
Once you believe everything is back in order, then you can conduct a few tests. In manual mode, run up and down your garage door to see if the problem is still there. If that passes, then your next test should be conducted using the automatic function. If both test runs go well then congratulations, you’ve fixed your garage door.